JAGUAR 265
Standard Specification

Hull
The Jaguar 265 hull is made by the manual lamination process (no spray laminate) using the latest materials. The laminate construction comprises polyester resin, glass filament materials and chop strand mat. Coloured hull and deck layer of high-grade isophthalic acid gelcoat. The deck and coachroof are in sandwich construction with integral non-slip tread surface.

The hull and deck are laminated whilst still in the mould to create a homogeneous structure and are finished with a white PVC rubbing strip. There are two keel options, either cast iron bilge or lead fin.

Colours
The Jaguar 265 has a white hull, white deck and has a blue and grey decorative strip.

Cockpit
The cockpit is open at the back end of the foot well to allow for self draining but is made safe by a swing down boarding ladder that bridges the gap in the pushpit and it folds down over the sugar scoop stern. The cockpit coamings are moulded to body contours and the seating is high, giving good visibility over the coach roof but still deep enough to maintain a feeling of safety and comfort. The tiller has a ladder extension and the single lever engine control is easily accessible. There is a single deep locker with ventilated stowage gas bottle, a 25L fuel tank and plenty of space for warps, fenders etc.

Coachroof I Deck
Wide sliding GRP hatch with drop in GRP washboards for closing the companionway. Cabin windows are aluminium frames with toughened glass and there is a large opening aluminium foredeck hatch. Anchor storage is in a foredeck.wcll. The side decks are wide with a moulded toe rail and substantial stanchions and guardrails.

Deck Fittings
S/S shroud plates & eye bolts 4 s/s stanchions with sockets
2 sheet winches PVC guard rail
2 halyard winches Hatch lock
4 genoa sliders on 2 tracks Electrical Deck socket
2 Triple halyard clutches Stem head roller
2 Quad deck organisers Aluminium opening hatch
2 Cam cleats with fairleads Hand bilge pump
3 Aluminium mooring cleats Compass
S/S pulpit & pushpit Depth Sounder
Log
Mainsheet Traveller centre
or cockpit option

Rudder
Through hull rudder with GRP stock

Rig
N4ast and boom of anodized aluminium with aluminium and stainless steel fittings, the double spreaders are swept back. The mast has internal hialyards and the boom has single line slab reefing lines

Standing Rigging
All rigging is 1x19 stainless steel wire with swaged terminals. The stainless steel rigging screws come complete with toggles.
2 cap shrouds 2 lower shrouds
Forestay with roller furling Backstay with Tensioner

Running Rigging
All ropes are pre-stretched braid on braid and blocks are black glass filled nylon and have cam cleats incorporated within the block
Main halyard 2 backstay double fiddle blocks
Main sheet 6 single halyard diverter blocks
Clew Outhaul 2 mainsheet double fiddle blocks
Jib Halyard 2 kicking strap double fiddle blocks
Jib Sheets
Kicking Strap
3 Reefing Lines

Sails
Mainsail white 8oz Polyant with 3 slab rccfs red. sail number and emblem . Working genoa white 8oz
Polyant with UV strip.

Interior Layout
The Companionway steps with engine under lead down into the open plan saloon which has upholstered base cushions and backs with stowage tinder on both single settee berths and double forward berth. The wooden table is hung from the mast compression post with a fiddle rail. The compact galley has a sink with Whale hand pump fed from a 501 water tank. There is a 2 burner cooker with oven and a cool box and plenty of lockers for kitchen equipment and an open shelf for crockery. The chart table is ‘/2 admiralty size with stowage under and a swing out stool. The separate heads has a vanity unit with stowage under and above, the sea toilet has easily accessible shut off valves. The separate double cabin has a large berth under the cockpit and a hanging locker. There is space to stand as you enter the cabin. The bulkheads and panels throughout are ply with a cherry veneer.

Engine
1GM 10 Yanmar 9hp diesel inboard drives a saildrive with a folding two bladed propeller. The control panel is located under the step of the companionway.

Electrical
12V/75Ah battery, battery isolator, wiring loom hidden between the mouldings. The switch panel incorporates MCBs for all the electrical circuits.
• 6 internal lights . Bi-colour steaming light
Combined tn & anchor masthead light • Switch Panel